Sliding Gates and Ramps for Parking Zones

SLIDING GATES
Sliding gates are used instead of entering ramps on protected spaces where trafffic frequency is not high. They are made of steal profiles, massive construction, and the space between the profiles is mede in shape of net, panel grid. The gate is moved by electro-motor, which may be three-phase, one-phasei and with low power. It is possible to start the gate by keys or by remote control.

FENDER FOR PUBLIC GARAGES AND PARKING LOTS TYPE B-3
It is used for regulation of entrance and exit or crossings in factories, public garages, parking lots, airport entrances etc.

Rampa sa branikom B-3

Housing of the switch point is a metal construction which guarantees impeccable work in all conditions. Under forced load ,,hit’’ on fender there’s no damage to the pole or to the housing (mechanism), but only control shoes is broken and easy replaceable.
Command box TYPE KK-10 is used for giving commands for placing road-crossing fender or sliding gate (open – closed position) also for control of end positions of the pole. The box is provided for inner mounting.

Technical data on the fender B-3:
Three-phase engine……………….3×380 V, 0,18 kW
Command current circuit…….24V AC
Time of rising of the pole………2 sec.
Time of lowering of the pole…..2 sec.
Temperature limit……. – 20 ºC do +55 ºC
Protection………………………….IP-44
Dimensions……………………..200×1000x200 mm